储层敏感性快速预测软件在大港油田的研究与应用

在储层特征分析，室内实验，机理研究的基础上，利用人工神经BP网络建立预测模型，并编制了预测储层5种敏感性的软件，该软件受人为因素干扰小，所需参数少，准确度高，综合符合率大于80％现场应用结果表明，该技术能为制定保护油气层技术措施提供较可靠的依据，能提高油田滚动开发效益，改善老油田的开发效果，该软件对BP算法进行了改进，（1）从两方面入手使网络摆脱平坦区，一是对输入数据进行归一化处理，使O1的取值在[0,1]之间，二是一旦网络陷入平坦区域，局部极小，使连接权值Wkj,Wji和阈值Qk,Qj同时缩小一个因子，λ＞1，可使Ok(1-Ok)脱离零值，离开平坦区；（2）加速收敛，方法有自动调整学习因子，添加动量项以及对权值进行批处理，用BP算法预测储层潜在敏感性，首先应确定影响储层敏感性的主要因素，然后根据这些因素有针对性地收集有关资料并进行处理，再根据敏感性预测的要求，设计相应的网络结构进行训练，最后对训练好的网络进行.检验。     

浅析6063铝型材表面“铝丝印”的成因与对策

在介绍“铝丝印”概念的基础上，从金属腐蚀学的观点出发，分析了“铝丝印”形成的电化学腐蚀机理，并提出了具体的解决措施。     

Measurement of Gibbs energies of formation of CoF2 and MnF2 using a new composite dispersed solid electrolyte

Gibbs energies of formation of CoF₂ and MnF₂ have been measured in the temperature range from 700 to 1100 K using Al₂O₃-dispersed CaF₂ solid electrolyte and Ni+NiF₂ as the reference electrode. The dispersed solid electrolyte has higher conductivity than pure CaF₂ thus permitting accurate measurements at lower temperatures. However, to prevent reaction between Al₂O₃ in the solid electrolyte and NiF₂ (or CoF₂) at the electrode, the dispersed solid electrolyte was coated with pure CaF₂, thus creating a composite structure. The free energies of formation of CoF₂ and MnF₂ are (± 1700) J mol⁻¹; {fx37-1} The third law analysis gives the enthalpy of formation of solid CoF₂ as ΔH° (298·15 K) = −672·69 (± 0·1) kJ mol⁻¹, which compares with a value of −671·5 (± 4) kJ mol⁻¹ given in Janaf tables. For solid MnF₂, ΔH°(298·15 K) = − 854·97 (± 0·13) kJ mol⁻¹, which is significantly different from a value of −803·3 kJ mol⁻¹ given in the compilation by Barinet al.     

Indicators for inspection and maintenance planning of concrete structures

Based on an idea introduced by Benjamin and Cornell (1970. Probability, statistics and decision for civil engineers. New York: McGaw Hill) and previous works by the authors it is demonstrated how condition indicators may be formulated for the general purpose of quality control and for assessment and inspection planning in particular. The formulation facilitates quality control based on sampling of indirect information about the condition of the considered components. This allows for a Bayesian formulation of the indicators whereby the experience and expertise of the inspection personnel may be fully utilized and consistently updated as frequentistic information is collected. The approach is illustrated on an example considering a concrete structure subject to corrosion. It is shown how half-cell potential measurements may be utilized to update the probability of excessive repair after 50 years. Furthermore in the same example it is shown how the concept of condition indicators might be applied to develop a cost optimal maintenance strategy composed of preventive and corrective repair measures.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

The solution of the inverse problem of gravitational potential using a set of measurements of different field elements

A numerical solution of the inverse problem of the gravitational field at a single point is obtained using six field elements for a point, a spherical cap, a differential spherical sector and a vertical segment. In the system of six equations obtained, the unknowns are the mass of the body, the depth of its center, and the second, third, and fourth degree moments. The accuracy of the solution of this system is ten times higher than when using three field elements. __________ Translated from Izmeritel’naya Tekhnika, No. 5, pp. 3–8, May, 2007.     

Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys

The influence of mechanical deformation and heating on the protective performance of a chromium-free conversion treatment for aluminium alloys has been assessed by polarisation and AC impedance measurements. Protection is unlikely to be seriously compromised by typical production operations.     

郯庐断裂带含油气性研究

郯庐断裂带是中国东部一条巨型断裂构造带,该文从其基本构造特征入手,分析了它的几何学、运动学和动力学特征,并进一步研究其含油气特点,认为:a)郯庐断裂带对中国东部诸多中新生代含油气盆地的形成及演化有重要的控制作用,不同演化阶段产生并控制了不同的沉积盆地(如松辽盆地和渤海湾盆地);b)郯庐断裂带对油气藏的形成及演化有重要的控制作用,不仅控制盆地烃源岩的发育、基本的储集层和盖层条件,以及圈闭的形成等等,而且对油气的生成、运移及聚集成藏、大中型油气田的形成及分布等有重要的控制作用.      

复杂断块油藏剩余油分布及配套挖潜对策

复杂断块油藏开发后期剩余油分散而难以识别，且其分布受多种因素的控制。在大港油区的港东开发区，根据以纵向1118个时间地层单元为对象的精细油藏描述，提出3类剩余油潜力：①已动用油层，即断层与微构造控制、注采井网不完善、层间非均质性、平面低渗透相带、层内渗流屏障、注采滞留区、边底水锥进等因素形成的剩余油；②新层，即以往未发现的低电阻油层和新发现油砂体；③滚动扩边。在潜力认识的基础上，以单砂体或流动单元为挖潜调整对象，在潜力富集区钻新井、更新井，改变非主力层的驱动方式，重组层系、井网，改变液流方向和间歇注水，并对潜力区配套实施补层、提液、压裂防砂、重复射孔、深度调剖等措施。港东开发区复杂断块油藏实施配套挖潜措施后，提高了高含水期的开发效益与水平。图1参17     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.